パワーテックシリーズ施工方法

Basic Application

With "Powertec"there's no hassie at all!
"Powertec"is a water-based protective coat. It is easily applied with a roller.

Basic application on a flat roof or veranda

① Please be sure to wear gloves prior to use.Transfer "Powertec" into another container such as a bucket.
② Before applying “Powertec,” clean the surface you intend to use it on.Prepare an approximately 1 in 2 dilution of the “Powertec” solution.Spray the dilution onto the verandaApply "Powertec" evenly to the entire veranda with a roller brush. Take care not to rub the surface too hard.
③ After the surface has dried, spray the undiluted solution of “Powertec” once again.Using a roller brush, apply “Powertec” to the entire surface in wide strokes with a roller brush. Take care not to rub the surface too hard. Repeat twice after drying. What’s more, if you apply a top coat of “Powertec” it becomes even more effective.

Specifications for the improve protection of flat roofs and verandas

Application specifications for underground steel Application specifications for flat floor


Application specifications for outlet  


製品一覧
  • 保護コート剤パワーテック
  • 防水・防錆・保護コート剤
  • パワーテックプロ
  • 壁面専用保護コート剤
  • 遮熱コート材パワークール
  • スベリ止めコート材
  • グレーコート
  • グレーコートプラス
  • カチオンアンダーコート
  • グリーンコート